Treated Lumber Ratings

Treated Lumber Ratings | This is the bottom of what used to be a treated lumber post. GASP! The WRONG type of treated lumber was used for this job. Copyright 2020 Tim Carter

Treated Lumber Ratings - Twelve at Last Count

DEAR TIM: I’m a remodeling contractor and have started to see a disturbing trend in the failure of treated lumber. I was hired to rebuild an outdoor stair railing that had a treated 4x4 post wrapped with redwood. A vast majority of the bottom of the post rotted away and the post was very wet once I removed the redwood. The bolts were very corroded too. The post was less than fifteen years old. I was also called to raise back up an outdoor shed that was built on 6x6 treated lumber posts that were partially buried in the soil. It turns out termites had eaten the post! I thought the treatment process was supposed to deter insect attack. Do you have any insight and knowing this, what would you do to create more permanent installations? Jonathan S., Milford, OH

You may not be a remodeling contractor like Jonathan, but you should have your head on a swivel when it comes to treated lumber. My guess is you might think that all treated lumber you see at the local home center or traditional lumber yard is all the same. That’s not true - not by a long shot.

Who Creates Treated Lumber Ratings?

A quick visit to the American Wood Protection Association (AWPA) website will clear up this matter for you in minutes, if not seconds. At the time I wrote this column, there were no less than twelve different treated lumber ratings or categories for treated lumber. Each one is given a specific acronym category code such as UC1, UC2, all the way up to UCFB.

Related Link:

Dramatic Treated Lumber Rot Photos

How is Lumber Treated?

Untreated raw lumber from the forest is treated with different chemical brews at different concentrations to achieve a pre-determined level of protection.

A good analogy might be winter jackets. You may put on a light puffer jacket if the outdoor temperature is in the mid 40s F. But if Old Man Winter is in a foul mood and the wind is howling with a temperature of -10 F, you might want to have on a Maine mountain parka.

CLICK or TAP HERE to get FREE BIDS from local deck builders.

Does Treated Lumber Need to Dry Out?

It’s quite possible the treated lumber that Jonathan is replacing was only rated for interior dry locations. Or, it could have been rated for outdoor use but was rated for rapid water runoff. Note that he said the post was wrapped in redwood so it stayed damp or was wet most of the time.

How Do You Identify the Type of Treatment?

When you purchase treated lumber, it’s supposed to have a small plastic tag stapled to the end of the lumber. This tag should show the AWPA use category. If I were using treated lumber outdoors and wanted maximum protection from rot and insects, I’d want the tag to say UC4C.

Does Treated Lumber Corrode Steel and Iron Bolts & Nails?

It’s very important for you to realize that much of the modern treated lumber has a very high concentration of copper in the wood. If you paid attention in high school chemistry class, you know that when you put copper and steel or iron in a beaker full of water, you start a chemical reaction that starts to corrode the iron or steel.

This is why it’s so very important to use bolts, nuts, nails, etc. with modern treated lumber that have the highest amount of corrosion resistance. The best would be stainless steel fasteners, but you’ll probably have to settle for double-dipped hot galvanized. Some high-quality fasteners are sold with a corrosion-resistance scale printed on the box. Match the corrosion resistance to your application.

Why Do Decks Collapse?

Deck collapse autopsies often reveal the cause to be corroded fasteners. If you couple this with poor framing practices and dubious structural construction methods, you can see why I never go onto a tall deck before I inspect it first.

Just a little over a year ago, a friend of my daughter almost died in Puerto Rico because she stepped alone onto a small outdoor deck and it collapsed under her weight. She broke her neck in the fall and had to have her spleen removed. Never trust an outdoor deck that’s more than 4 feet off the ground.

Can You Trust Treated Lumber?

There are other issues I have with treated lumber. While these are quite cynical in nature, the possibility that the lumber really doesn’t have the protection the tag states is possible. Imagine these scenarios. What happens if the concentration of the brew is not what it’s supposed to be? What happens if there’s a failure in the gauges connected to the pressure vessels where the lumber is being pumped full of chemicals? What happens if the plant operator had a fight with his spouse or boss that morning? Yes, these are all very remote possibilities, but nothing is certain in this world except death and taxes, right?

You do have other options in many cases when it comes to building things exposed to the weather. Instead of using treated lumber, you can use metal. The treated 4x4 post that Jonathan removed could have been a galvanized 4x4 metal tube. While the homeowner may not have liked the look, the railing system could have been aluminum.

It pays to talk with a contractor with at least twenty years of building experience in situations like this. I’d also suggest talking with several, not just one, so you get a variance of opinions. You would do yourself a favor by engaging your own critical-thinking skills and ratchet back your trust factor. Keep in mind that some marketing managers for products push the envelope on their product claims. For example, do you really believe in a lifetime warranty on roofing shingles?

Column 1359

The post Treated Lumber Ratings appeared first on Ask the Builder.

Via builders feed http://www.rssmix.com/